L68A1 মাস্ট জন্য অ্যাঙ্কর ফ্রেম কলার

L68A1 মাস্ট জন্য অ্যাঙ্কর ফ্রেম কলার
  • ZCJJ
  • চীন
  • 5 থেকে 30 দিন
  • 50 থেকে 200 পিসি, সেট

সুইজারল্যান্ড টাওয়ার ক্রেন, লিচটেনস্টাইন টাওয়ার ক্রেন

Products Specification

Type , Model: Anchor Frame Collar For L68A1 Mast

Size: 2m for 2M L type mast

Materials: Q345B

Process: Blasting derusting, 

Painting:  Under painting , Middle painting, Surface painting.

Our factory produce and supply almost all famous brand tower crane :Mast section, Anchor Frame, Fixing angle ,Adaptor and so on as good quality and price.

Anchor Frame L68A1

Collar L68A1 Mast

SYM

 

Anchor Frame Collar For L68A1 Mast

 

Tower Crane Knowledge sharing:

 

Cause analysis and preventive measures for sliding hook of tower crane

1. Reasons for sliding hook

(1) in the distribution box of tower crane, the fixed screws of the contactor's power supply inlet and outlet wires are loose, the wiring terminal board's wiring bolts are not in good contact, and the main contact of the contactor is not in good contact.

(2) poor ablation contact of the wiring bolts of the motor rotor and stator coil.

(3) high and low speed motor brake pad wear exceeds the specified requirements.

(4) transmission gear broken, fixed gear bolt loose.

(5) lack of phase protector does not work.

Anchor Frame Collar For L68A1 Mast

2. Preventive measures

(1) the driver should calm down after the occurrence of sliding hook phenomenon at work, and timely inform the signal worker to tell the ground staff to leave. Carry out the operation according to the operating rules, such as hook lifting, slewing, trolley, etc., put the weight in the no man's land.

(2) do a good job of pre-shift, in-shift and after-shift safety inspection, which should be carried out by eye, ear and manual.

(3) check and tighten various connection points of the circuit irregularly.

 

Anchor Frame Collar For L68A1 Mast

(4) check regularly whether the brake pads of each brake are normal, whether the motor connection bolts are in good contact, and whether the main contact point of the contactor is in normal contact.

(5) maintenance personnel should be serious and responsible for the work, strictly in accordance with the requirements of safe operating procedures to do, the replacement of accessories must be changed, do a good job after the inspection, test run work.

Anchor Frame Collar For L68A1 Mast

 

 

 


সর্বশেষ দাম পান? আমরা যত তাড়াতাড়ি সম্ভব প্রতিক্রিয়া জানাব (12 ঘন্টার মধ্যে)

গোপনীয়তা নীতি

close left right